Skip to content

Latest commit

 

History

History
38 lines (31 loc) · 2.29 KB

README.md

File metadata and controls

38 lines (31 loc) · 2.29 KB

xrdp_dualmon

About

A workaround solution to enable dual monitor in the xrdp server when using Sesman and X11rdp. This is a true multi monitor ("multimon") solution, every display is independent and can maximize x-windows to fit fullscreen. Usage: Pass the "/span" argument when RDPing to the xrdp server. The solution is based on the following:

Prerequisites

  • Screens are assumed to have the same resolution.
  • Only two screens are supported (this is what I needed), but this could easily be changed.
  • Dualmon ratio "threshold" is a const which is also tweakable (explained in detail later).
  • Update (29/05/2013) - It appears as if there's a resolution limitation, both screens' width combined should not exceed 2800px. That said, I got some good feedback from several hundred users on an xrdp server - looks like it works.

Installation

  • Download xrdp source and replace xrdp/sesman/session.c with the file in this repo.
  • Compile and install xrdp with the xinerama dependency.
  • Compile and install fake xinerama:
    • Run gcc -O2 -Wall Xinerama.c -fPIC -o libXinerama.so.1.0.0 -shared
    • Replace /usr/lib/libXinerama.so.1.0.0 with the new file you've just created.

How it works

  • The support of dualmon RDP experience to an xrdp server is achieved by "faking" two virtual screens.
  • When a user connects to an xrdp server using "/span", a wider window is sent to the xrdp server in client_info.
  • When width/height is larger then a certain ratio, it is safe to assume that this user is actually using two monitors.
  • At this point, and before the X11 session starts, we want to create the fake xinerama file, that creates two "virtual" screens.
  • In fact the two virtual screens are configured to be sized just like the physical ones - this creates the dualmon experience.
  • So not the most elegant solution, but it looks like it works just fine. Note that the RDP protocol does send a different header when "/multimon" is used, but I've decided to create a simpler version.