From 64f091e96229b290e0cafc951fc9c626aae698f9 Mon Sep 17 00:00:00 2001
From: caternuson <caternuson@gmail.com>
Date: Wed, 4 Dec 2019 11:26:18 -0800
Subject: [PATCH] remove NeoPixel_SPI class

---
 neopixel.py | 91 ++---------------------------------------------------
 1 file changed, 2 insertions(+), 89 deletions(-)

diff --git a/neopixel.py b/neopixel.py
index 09bb300..9840700 100644
--- a/neopixel.py
+++ b/neopixel.py
@@ -30,13 +30,8 @@
 
 import math
 
-try:
-    # imports needed for main NeoPixel class
-    import digitalio
-    from neopixel_write import neopixel_write
-except NotImplementedError:
-    # silently accept this, can still use NeoPixel SPI class
-    pass
+import digitalio
+from neopixel_write import neopixel_write
 
 __version__ = "0.0.0-auto.0"
 __repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_NeoPixel.git"
@@ -235,85 +230,3 @@ def show(self):
             neopixel_write(self.pin, self.buf)
         else:
             neopixel_write(self.pin, bytearray([int(i * self.brightness) for i in self.buf]))
-
-class NeoPixel_SPI(NeoPixel):
-    """
-    A sequence of neopixels.
-
-    :param ~busio.SPI spi: The SPI bus to output neopixel data on.
-    :param int n: The number of neopixels in the chain
-    :param int bpp: Bytes per pixel. 3 for RGB and 4 for RGBW pixels.
-    :param float brightness: Brightness of the pixels between 0.0 and 1.0 where 1.0 is full
-      brightness
-    :param bool auto_write: True if the neopixels should immediately change when set. If False,
-      `show` must be called explicitly.
-    :param tuple pixel_order: Set the pixel color channel order. GRBW is set by default.
-
-    Example:
-
-    .. code-block:: python
-
-        import board
-        import neopixel
-
-        pixels = neopixel.NeoPixel_SPI(board.SPI(), 10)
-        pixels.fill(0xff0000)
-    """
-    #pylint: disable=invalid-name, super-init-not-called
-
-    FREQ = 6400000  # 800kHz * 8, actual may be different
-    TRST = 80e-6    # Reset code low level time
-
-    def __init__(self, spi, n, *, bpp=3, brightness=1.0, auto_write=True, pixel_order=None):
-        from adafruit_bus_device.spi_device import SPIDevice
-        self._spi = SPIDevice(spi, baudrate=self.FREQ)
-        with self._spi as spibus:
-            try:
-                # get actual SPI frequency
-                freq = spibus.frequency
-            except AttributeError:
-                # use nominal
-                freq = self.FREQ
-        self.RESET = bytes([0]*round(freq*self.TRST))
-        self.n = n
-        if pixel_order is None:
-            self.order = GRBW
-            self.bpp = bpp
-        else:
-            self.order = pixel_order
-            self.bpp = len(self.order)
-        self.buf = bytearray(self.n * self.bpp)
-        self.spibuf = bytearray(8*len(self.buf))
-        # Set auto_write to False temporarily so brightness setter does _not_
-        # call show() while in __init__.
-        self.auto_write = False
-        self.brightness = brightness
-        self.auto_write = auto_write
-
-    def deinit(self):
-        """Blank out the NeoPixels."""
-        for i in range(len(self.buf)):
-            self.buf[i] = 0
-        self.show()
-
-    def show(self):
-        """Shows the new colors on the pixels themselves if they haven't already
-        been autowritten."""
-        self._transmogrify()
-        with self._spi as spi:
-            # write out special byte sequence surrounded by RESET
-            # leading RESET needed for cases where MOSI rests HI
-            spi.write(self.RESET + self.spibuf + self.RESET)
-
-    def _transmogrify(self):
-        """Turn every BIT of buf into a special BYTE pattern."""
-        k = 0
-        for byte in self.buf:
-            byte = int(byte * self.brightness)
-            # MSB first
-            for i in range(7, -1, -1):
-                if byte >> i & 0x01:
-                    self.spibuf[k] = 0b11110000 # A NeoPixel 1 bit
-                else:
-                    self.spibuf[k] = 0b11000000 # A NeoPixel 0 bit
-                k += 1