{{BOM}}
You will need a 3d printer{qty:1, cat: tool} and about 1kg of PLA filament{qty:1kg, cat:consumable}.
Using the slicer that comes with your printer, print the following parts. Some require support. A brim is advised for all parts.
| Name | STL file | Qty | Supports Required? |
|---|---|---|---|
| [bottom]{output, qty:1} | bottom_v1.3.stl{previewpage} | 1 | No |
| [rack legs]{output, qty:4} | Rack_Leg_21_Units.stl{previewpage} | 4 | No |
| [Netgate Shelf]{output, qty:4} | SG-1100_Shelfv1.1.stl{previewpage} | 1 | No |
| [NUC Shelf]{output, qty:4} | Tall_NUC_Shelf_v1.2.stl{previewpage} | 1 | No |
| [Omni Shelf]{output, qty:4} | Omni_20_v1.5.stl{previewpage} | 1 | No |
| [Omni Shelf Lid]{output, qty:4} | Omni_20_Top_v1.5.stl{previewpage} | 1 | No |
| [Patch panel]{output, qty:4} | Keystone_Patch_Panel_2_Unitsv2.1.stl{previewpage} | 1 | No |
| [SSD shelf]{output, qty:4} | Dual_SSD_Shelf-_v2.0.stl{previewpage} | 1 | No |
| [UniFi Switch Shelf]{output, qty:4} | USW-Flex_Shelfv1.2.stl{previewpage} | 1 | No |
| [USB Power Shelf]{output, qty:4} | USB_Hub_Shelf_v1.2.stl{previewpage} | 1 | No |
| [Raspberry Pi Shelf]{output,qty:1} | RPi_4B_Shelf_v1.3.stl{previewpage}{previewpage} | 1 | No |
| [Stuff Shelf]{output,qty:1} | Stuff_Shelf_1.0.stl{previewpage} | 1 | No |
| [Power Box]{output,qty:1} | Power_Box_v1.3.stl{previewpage} | 1 | No |
| [AP Mount Top]{output,qty:1} | AP_Mount_for_1430New_v1.5_Top.stl{previewpage} | 1 | Yes |
| [AP Mount Bottom]{output,qty:1} | AP_Mount_for_1430New_v1.5_Bottom.stl{previewpage} | 1 | Yes |
You can download all of the STLs as a single zipfile{zip, pattern:"*.stl"}
Remove the brim with a utility knife{qty:1, cat:tool}