- If the **Chromadeck** firmware is up to date, then press the **Connect Duo** button in the **Chromalink Duo Panel** to connect the Duo:
-
@@ -144,29 +52,19 @@ Check out the [Lightshow.lol Guide](lightshow_lol.html) to see all the awesome t
---
- **Puting everything Back Together**
-
-- remove the **Duo** from the **Chromalink** and reconnect the battery. Make sure the corners of the connector are flush for a reliable connection.
-- click the button to power on the Duo and verify the battery is fully connected.
+# Troubleshooting
-- If it works, insert it back into the case. Otherwise recheck the battery connector.
+**The Duo doesn't turn on**
+Make sure the duo was properly seated into the Chromalink.
-
-
-
-
+**It doesn't work!**
+If you encounter any issues, try refreshing the page and unplugging and reconnecting your chromadeck. Also make sure the power switch is in the ON position while it is plugged in.
-
-
Congratulations You have successfully updated the Duo Firmware!
-
+**It still doesn't work!**
+Join our [discord](https://discord.gg/4R9at8S8Sn) and ask for help!
---
-# Troubleshooting
-
-**It doesn't work!**
+## Reassembly
+Once you've finished editing your modes, make sure you [put everything back together](duo_reassembly_guide.html).
-If you encounter any issues, try refreshing the page and unplugging and reconnecting your chromadeck. Also make sure the power switch is in the ON position while it is plugged in.
-
-**It still doesn't work!**
-Join our [discord](https://discord.gg/4R9at8S8Sn) and ask for help!
\ No newline at end of file
diff --git a/docs/duo_guide.md b/docs/duo_guide.md
index 44452358b5..a84329873a 100644
--- a/docs/duo_guide.md
+++ b/docs/duo_guide.md
@@ -151,7 +151,7 @@ Welcome to the Duo LED Guide, this page aims to get you up and running as fast a
diff --git a/docs/duo_reassembly_guide.md b/docs/duo_reassembly_guide.md
new file mode 100644
index 0000000000..83e530c895
--- /dev/null
+++ b/docs/duo_reassembly_guide.md
@@ -0,0 +1,22 @@
+---
+layout: default
+title: Duo Reassembly Guide
+nav_order: 3
+parent: Duo Connecting or Updating Guide
+---
+
+ # Reassembling Your Duo
+
+- remove the **Duo** from the **Chromalink** and reconnect the battery. Make sure the corners of the connector are flush for a reliable connection.
+- click the button to power on the Duo and verify the battery is fully connected.
+
+- If it works, insert it back into the case. Otherwise recheck the battery connector.
+
+
+
+
+
+
+
+
Congratulations Your Duo is ready to go!
+
\ No newline at end of file
diff --git a/docs/duo_upgrade_guide.md b/docs/duo_upgrade_guide.md
index d713aa12af..281e3cf274 100644
--- a/docs/duo_upgrade_guide.md
+++ b/docs/duo_upgrade_guide.md
@@ -1,8 +1,8 @@
---
layout: default
-title: Duo Upgrade Guide
-nav_order: 2
-parent: Duo Guide
+title: Duo Update Guide
+nav_order: 1
+parent: Duo Connecting or Updating Guide
---
-
-
⚠ Warning ⚠
-
-
-{: .warning}
-Connecting Duos to a Chromadeck
can cause damage to them if you do not follow instructions!
-Be patient, careful, and double-check instuctions before proceeding.
-StoneOrbits is not responsible for damage caused this way.
-
-
----
-
-# Duo Upgrade Guide
-
-
-
-Both a **Chromadeck** and a **Chromalink** cable are necessary to update the Duo.
-
-Before updating Duo firmware, always ensure the **Chromadeck** is [up to date](chromadeck_upgrade_guide.html)
- first.
-
-
-- **Use a data-capable USB cable, power-only cables won't work.**
-- Windows will notify upon successful connection
-- Mac may work but is not officially supported.
-
-
-With your Duo, Chromadeck, Chromalink, Computer, and USB-C cable ready, proceed to the next step.
-
----
-
-**Remove the Casing**
-
- - Start by carefully removing the Duo from it's case. It should come out with little resistance.
- - If you find it does not come out easily, check to see if the bulb is caught on the opening as shown in the 2nd gif.
-
-
-
-
-
-
----
-
-**Removing the Battery**
-
-
-
-
⚠ Warning ⚠
- This is a potentially dangeous step!
-
-
-{: .warning}
-Failure to remove the battery before connecting to the Chromalink will cause the battery's lifespan to shorten dramatically.
-Removing the battery incorrectly can break the battery connector, rendering the chip broken and unrepairable.
-StoneOrbits is not responsible for any damage to the Duo or battery caused this way.
-
-
-- In order to safely update the Duo, the battery must be carefully disconnected first.
-- **Gently** and **peel** the Duo battery away from the Duo like shown below.
-
-
-
-
-
----
-
-**Setting up the Chromadeck and Chromalink**
- - Connect the **Chromalink** cable to the **Chromadeck**, then plug the **Chromadeck** into the PC and power it on.
-
-
-
-
-
----
-
-**Connecting the Duo to the Chromalink**
- - Seat the Duo into the **Chromalink** dock and slide it into place like shown below
-
-
-
-
-
-
----
-
-**Verify Connection**
-
- - To verify the Duo is securely connected to the Chromalink, press the button to turn it on.
- - If it does not turn on, review the previous steps to make sure there are no mistakes.
-
----
-
-
-**Updating the Duo**
+# Updating Your Duo
- Navigate a **Google Chrome** browser to [lightshow.lol](https://lightshow.lol) and click the **Connect Device** USB icon:
@@ -130,21 +37,24 @@ StoneOrbits is not responsible for any damage to the Duo or battery caused this
- With the **Chromadeck** connected to lightshow.lol, two new panels will be visible: **Device Updates** & **Chromalink Duo**
-
-
Note: If you haven't
updated the Chromadeck yet, do it
now!
-
+{: .note }
+
Note: If you haven't
updated the Chromadeck yet, do it
now!
+
+
- If the **Chromadeck** firmware is up to date, then press the **Update Firmware** button in the **Chromalink Duo Panel** to update the Duo:
-
-
Note: It is unnecessary to press Connect Duo when updating Firmware!
-
+{: .note }
+
Note: It is unnecessary to press Connect Duo when updating Firmware!
+
+
+ You should see the blue bar on your screen fill with progress and your Chromadeck will fill with green LEDs to represent the progress as well.
- Let the flash complete.
@@ -153,29 +63,16 @@ StoneOrbits is not responsible for any damage to the Duo or battery caused this
- If it powers on successfully, proceed to the next step or go to the [Chromalink Guide](chromalink_guide.html) to see how to use your Duo with Lightshow.lol
- ---
-
- **Puting everything Back Together**
-
-- remove the **Duo** from the **Chromalink** and reconnect the battery. Make sure the corners of the connector are flush for a reliable connection.
-- click the button to power on the Duo and verify the battery is fully connected.
-
-- If it works, insert it back into the case. Otherwise recheck the battery connector.
-
-
-
-
-
-
Congratulations You have successfully updated the Duo Firmware!
----
+ ---
# Troubleshooting
**The Duo doesn't turn on**
+
Repeat the process if the Duo doesn't work, make sure the duo was properly seated into the Chromalink and the progress bar in the Chromalink window fills.
**The progress bar doesn't start and the Chromadeck LEDs are yellow**
