Size parameter for adaptive bed mesh

[coubi64]

Hi all.

I need to add size parameter to my start gcode but i don't know the parameters name for OrcaSlicer

This example is for SuperSlicer:

PRINT_START SIZE={first_layer_print_min[0]}_{first_layer_print_min[1]}_{first_layer_print_max[0]}_{first_layer_print_max[1]}

What's the good ones for OrcaSlicer?

[hliebscher]

is the Same for OrcaSlicer
{first_layer_print_min[0]} > xmin
{first_layer_print_max[0]} > xmax
{first_layer_print_min[1]} > ymin
{first_layer_print_max[1]} > ymax

[coubi64]

Thank you for your answer.

I tried this two ways to use my PRINT_START. They both work. Is there a better one rather another?

PRINT_START EXTRUDER_TEMP={first_layer_temperature[0]} BED_TEMP={first_layer_bed_temperature[0]} SIZE={first_layer_print_min[0]}_{first_layer_print_min[1]}_{first_layer_print_max[0]}_{first_layer_print_max[1]}

PRINT_START EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer] SIZE={first_layer_print_min[0]}_{first_layer_print_min[1]}_{first_layer_print_max[0]}_{first_layer_print_max[1]}

[hliebscher]

Look at your Gcode for this line and Check the Temperature values