You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
A request to implement a Layout PCell + CML for a fully-parameterized directional coupler for pulley-coupled resonators, with the following parameters:
g: gap
rr: Radius of the ring.
rb: Radius of the bus (set the default to be 2Rr as in Fig 1).
wr: Waveguide width for the ring
wb: Waveguide width for the bus coupler
rc: Radius of the coupler, for the waveguide leaving the ring.
theta: The arc for the coupler
pol: 'TE' or 'TM'; for use in INTERCONNECT calling FDTD to simulate one of these if pol is defined, or simulate both if undefined.
wavelength: default 1550. Consider a simulation bandwidth of 10% of the central wavelength. Used by the INTERCONNECT-FDTD simulation.
A request to implement a Layout PCell + CML for a fully-parameterized directional coupler for pulley-coupled resonators, with the following parameters:
name: ebeam_dc_halfring_pulley
generate an icon (SWG file)
See Figure 1 in the following paper:
Nourhan Eid, Hasitha Jayatilleka, Michael Caverley, Sudip Shekhar, Lukas Chrostowski, Nicolas A. Jaeger, "Wide FSR Silicon-on-Insulator Microring Resonator with Bent Couplers", IEEE Group IV Photonics Conference, 08/2015
The text was updated successfully, but these errors were encountered: