Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Cannot build example OTAA_OLED using PlatformIO #25

Open
torkleyy opened this issue Dec 11, 2019 · 6 comments
Open

Cannot build example OTAA_OLED using PlatformIO #25

torkleyy opened this issue Dec 11, 2019 · 6 comments

Comments

@torkleyy
Copy link

I'm trying to build this example using PlatformIO with the following config:

[env:heltec_wifi_lora_32_V2]
platform = espressif32
board = heltec_wifi_lora_32_V2
framework = arduino

lib_deps =
    [email protected]

This is the output of build:

Processing heltec_wifi_lora_32_V2 (platform: espressif32; board: heltec_wifi_lora_32_V2; framework: arduino)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/heltec_wifi_lora_32_V2.html
PLATFORM: Espressif 32 1.11.1 > Heltec WiFi LoRa 32 (V2)
HARDWARE: ESP32 240MHz, 320KB RAM, 8MB Flash
DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES: toolchain-xtensa32 2.50200.80 (5.2.0), framework-arduinoespressif32 2.10004.191002 (1.0.4), tool-esptoolpy 1.20600.0 (2.6.0)
LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 27 compatible libraries
Scanning dependencies...
Dependency Graph
|-- <ESP32_LoRaWAN> 2.0
|   |-- <Wire> 1.0.1
|   |-- <SPI> 1.0
|-- <SPI> 1.0
|-- <Wire> 1.0.1
Building in release mode
Compiling .pio/build/heltec_wifi_lora_32_V2/src/main.cpp.o
Generating partitions .pio/build/heltec_wifi_lora_32_V2/partitions.bin
Compiling .pio/build/heltec_wifi_lora_32_V2/libd88/Wire/Wire.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib8c3/SPI/SPI.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/LoRa.cpp.o
Archiving .pio/build/heltec_wifi_lora_32_V2/lib8c3/libSPI.a
Indexing .pio/build/heltec_wifi_lora_32_V2/lib8c3/libSPI.a
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/LoRaMac.c.o
In file included from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.h:35:0,
                 from src/main.cpp:34:
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276.h:469:13: warning: 'void RxChainCalibration()' declared 'static' but never defined [-Wunused-function]
 static void RxChainCalibration( void );
             ^
In file included from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.h:35:0,
                 from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/LoRaMac.c:21:
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276.h:469:13: warning: 'RxChainCalibration' declared 'static' but never defined [-Wunused-function]
 static void RxChainCalibration( void );
             ^
Archiving .pio/build/heltec_wifi_lora_32_V2/libd88/libWire.a
Indexing .pio/build/heltec_wifi_lora_32_V2/libd88/libWire.a
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/LoRaMacCrypto.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/Mcu.S.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/OLEDDisplay.cpp.o
In file included from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.h:35:0,
                 from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/LoRa.h:6,
                 from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/LoRa.cpp:1:
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276.h:469:13: warning: 'void RxChainCalibration()' declared 'static' but never defined [-Wunused-function]
 static void RxChainCalibration( void );
             ^
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/OLEDDisplayUi.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/aes.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/board.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/cmac.c.o
In file included from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.h:35:0,
                 from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.c:15:
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276.h:469:13: warning: 'RxChainCalibration' declared 'static' but never defined [-Wunused-function]
 static void RxChainCalibration( void );
             ^
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.c:232:13: warning: 'BoardUnusedIoInit' defined but not used [-Wunused-function]
 static void BoardUnusedIoInit( void )
             ^
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.c:240:6: warning: 'SystemClockConfig' defined but not used [-Wunused-function]
 void SystemClockConfig( void )
      ^
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.c:245:6: warning: 'CalibrateSystemWakeupTime' defined but not used [-Wunused-function]
 void CalibrateSystemWakeupTime( void )
      ^
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/delay.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/dht11.cpp.o
In file included from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.h:35:0,
                 from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/delay.c:15:
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276.h:469:13: warning: 'RxChainCalibration' declared 'static' but never defined [-Wunused-function]
 static void RxChainCalibration( void );
             ^
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/fifo.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/rtc-board.S.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/sx1276-board.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/sx1276.c.o
In file included from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.h:35:0,
                 from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276-board.c:15:
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276.h:469:13: warning: 'RxChainCalibration' declared 'static' but never defined [-Wunused-function]
 static void RxChainCalibration( void );
             ^
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/timer.S.o
Compiling .pio/build/heltec_wifi_lora_32_V2/lib5b9/ESP32_LoRaWAN_ID6633/utilities.c.o
Archiving .pio/build/heltec_wifi_lora_32_V2/libFrameworkArduinoVariant.a
Indexing .pio/build/heltec_wifi_lora_32_V2/libFrameworkArduinoVariant.a
In file included from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/board.h:35:0,
                 from .pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/utilities.c:17:
.pio/libdeps/heltec_wifi_lora_32_V2/ESP32_LoRaWAN_ID6633/src/sx1276.h:469:13: warning: 'RxChainCalibration' declared 'static' but never defined [-Wunused-function]
 static void RxChainCalibration( void );
             ^
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/Esp.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/FunctionalInterrupt.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/HardwareSerial.cpp.o
Archiving .pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a
Indexing .pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/IPAddress.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/IPv6Address.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/MD5Builder.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/Print.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/Stream.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/StreamString.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/WMath.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/WString.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/base64.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/cbuf.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-adc.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-bt.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-cpu.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-dac.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-gpio.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-i2c.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-ledc.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-matrix.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-misc.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-psram.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-rmt.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-sigmadelta.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-spi.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-time.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-timer.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-touch.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/esp32-hal-uart.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/libb64/cdecode.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/libb64/cencode.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/main.cpp.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/stdlib_noniso.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/wiring_pulse.c.o
Compiling .pio/build/heltec_wifi_lora_32_V2/FrameworkArduino/wiring_shift.c.o
Archiving .pio/build/heltec_wifi_lora_32_V2/libFrameworkArduino.a
Indexing .pio/build/heltec_wifi_lora_32_V2/libFrameworkArduino.a
Linking .pio/build/heltec_wifi_lora_32_V2/firmware.elf
.pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a(rtc-board.S.o): In function `TimerGetTimerValue':
D:\/D:\61722\Documents\Arduino\hardware\heltec\esp32\libraries\ESP32_LoRaWAN\src\rtc-board.c:120:(.text.TimerGetTimerValue+0x31): dangerous relocation: call8: call target out of range: __udivdi3
.pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a(rtc-board.S.o): In function `TimerGetElapsedAlarmTime':
D:\/D:\61722\Documents\Arduino\hardware\heltec\esp32\libraries\ESP32_LoRaWAN\src\rtc-board.c:120:(.text.TimerGetElapsedAlarmTime+0x32): dangerous relocation: call8: call target out of range: __udivdi3
.pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a(rtc-board.S.o): In function `TimerComputeElapsedTime':
D:\/D:\61722\Documents\Arduino\hardware\heltec\esp32\libraries\ESP32_LoRaWAN\src\rtc-board.c:134:(.text.TimerComputeElapsedTime+0x32): dangerous relocation: call8: call target out of range: __udivdi3
collect2: error: ld returned 1 exit status
*** [.pio/build/heltec_wifi_lora_32_V2/firmware.elf] Error 1
==================================================================================== [FAILED] Took 5.99 seconds ====================================================================================
The terminal process terminated with exit code: 1

Note the errors:

Linking .pio/build/heltec_wifi_lora_32_V2/firmware.elf
.pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a(rtc-board.S.o): In function `TimerGetTimerValue':
D:\/D:\61722\Documents\Arduino\hardware\heltec\esp32\libraries\ESP32_LoRaWAN\src\rtc-board.c:120:(.text.TimerGetTimerValue+0x31): dangerous relocation: call8: call target out of range: __udivdi3
.pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a(rtc-board.S.o): In function `TimerGetElapsedAlarmTime':
D:\/D:\61722\Documents\Arduino\hardware\heltec\esp32\libraries\ESP32_LoRaWAN\src\rtc-board.c:120:(.text.TimerGetElapsedAlarmTime+0x32): dangerous relocation: call8: call target out of range: __udivdi3
.pio/build/heltec_wifi_lora_32_V2/lib5b9/libESP32_LoRaWAN_ID6633.a(rtc-board.S.o): In function `TimerComputeElapsedTime':
D:\/D:\61722\Documents\Arduino\hardware\heltec\esp32\libraries\ESP32_LoRaWAN\src\rtc-board.c:134:(.text.TimerComputeElapsedTime+0x32): dangerous relocation: call8: call target out of range: __udivdi3
@Tonnard
Copy link

Tonnard commented Dec 12, 2019

I have the same issue, it does however build perfectly in Ardunio IDE

@moisesfa
Copy link

moisesfa commented Jan 4, 2020

Same error in all examples when using this library with Platformio.
Any solution?

@moisesfa
Copy link

I just discovered that it works with platform = [email protected] in the file platformio.ini in my heltec_wireless_stick.
Regards.

@torkleyy
Copy link
Author

torkleyy commented Jun 3, 2020

I ended up using lmic instead.

Working demo

@Waldmensch1
Copy link

The [email protected] workaround works but any Example ends in a Panic loop on "Joining" so the Library is unusable on PIO for whatever reason.

@TwentySixer TwentySixer mentioned this issue Aug 26, 2020
Open
@yglukhov
Copy link

yglukhov commented Feb 8, 2022

I'm getting the same errors in Arduino IDE with latest master, and 2.1.1.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
5 participants
@yglukhov @moisesfa @torkleyy @Waldmensch1 @Tonnard