-
Connect the camera with ethernet cable.
-
Open Internet Explorer (it doesn't work with other browsers correctly)
-
Open Configuration, and change:
System Settings -> Basic Information
-
Device Name to state sr-camera-X, where X is the next ID of the camera, as documented in Devices Google sheet
-
Device No. to state X, where X is the next ID of the camera, as documented in Devices Google sheet
System Settings -> Time Settings
- Tick NTP, and set interval to 60 minutes
Basic Settings -> NAT
- Device Name to state sr-camera-X
Network -> Basic Settings -> WLAN
- Set IP address to your preference, as documented in Devices Google sheet
- Do not forget to add camera MAC address to the router reservation table, and assign ip address assigned above
- Set Default Gateway to point to IP address of the router, as documented in Devices Google sheet
- Set primary DNS to 8.8.8.8
Network -> Advanced Network -> WiFi
- Select WiFi network
- Select security mode WPA2-personal
- Select encryption type AES
- Set password (key 1)
- Un-tick Enable WPS
Network -> Basic Settings -> Ports
- Enable RTSP protocol on port 554
System - User Management
- Add "sportsreplay" user for RTSP authentication, and make sure to put the same password to Devices Google sheet, and sports-replay.ini, as part of video setting in section recorder.
Image Settings -> OSD Settings
- Un-tick all options under OSD settings
Image Settings -> Display Settings -> Day/Night switch
- Set Day/Night Switch to Day
- Turn on Smart Supplement Light
Image Settings -> Display Settings -> Exposure Settings
- Set Exposure Settings to 1/250
Video/Audio Settings
-
Resolution - 1280 x 720
-
Bitrate Type - Constant
-
Frame Rate - 25
-
Max. Bitrate - 2048
-
Video Encoding - H.264
-
H.264+ - OFF
-
I Frame interval - 10
-
SVC - Off
-
Smoothing - 75
-