From f8788da0bbad0aea2f6bbf7eb29278040c007bf8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thea=20Sch=C3=B6bl?= Date: Wed, 25 Sep 2024 22:51:55 +0200 Subject: [PATCH] feat: engine_s2 feat: lite_s2 feat: x_s2 --- .../boards/charachorder_engine_s2/board.cmake | 2 + .../boards/charachorder_engine_s2/board.h | 74 +++++++++++++++++++ .../boards/charachorder_engine_s2/sdkconfig | 7 ++ .../boards/charachorder_lite_s2/board.cmake | 2 + .../boards/charachorder_lite_s2/board.h | 74 +++++++++++++++++++ .../boards/charachorder_lite_s2/sdkconfig | 7 ++ .../boards/charachorder_x_s2/board.cmake | 2 + .../boards/charachorder_x_s2/board.h | 74 +++++++++++++++++++ .../boards/charachorder_x_s2/sdkconfig | 7 ++ ports/espressif/partitions-2MB.csv | 11 +++ 10 files changed, 260 insertions(+) create mode 100644 ports/espressif/boards/charachorder_engine_s2/board.cmake create mode 100644 ports/espressif/boards/charachorder_engine_s2/board.h create mode 100644 ports/espressif/boards/charachorder_engine_s2/sdkconfig create mode 100644 ports/espressif/boards/charachorder_lite_s2/board.cmake create mode 100644 ports/espressif/boards/charachorder_lite_s2/board.h create mode 100644 ports/espressif/boards/charachorder_lite_s2/sdkconfig create mode 100644 ports/espressif/boards/charachorder_x_s2/board.cmake create mode 100644 ports/espressif/boards/charachorder_x_s2/board.h create mode 100644 ports/espressif/boards/charachorder_x_s2/sdkconfig create mode 100644 ports/espressif/partitions-2MB.csv diff --git a/ports/espressif/boards/charachorder_engine_s2/board.cmake b/ports/espressif/boards/charachorder_engine_s2/board.cmake new file mode 100644 index 000000000..abbdf7abc --- /dev/null +++ b/ports/espressif/boards/charachorder_engine_s2/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32s2") diff --git a/ports/espressif/boards/charachorder_engine_s2/board.h b/ports/espressif/boards/charachorder_engine_s2/board.h new file mode 100644 index 000000000..0891539df --- /dev/null +++ b/ports/espressif/boards/charachorder_engine_s2/board.h @@ -0,0 +1,74 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef CHARACHORDER_ENGINE_S2_H_ +#define CHARACHORDER_ENGINE_S2_H_ + +//--------------------------------------------------------------------+ +// Button +//--------------------------------------------------------------------+ + +// Enter UF2 mode if GPIO is pressed while 2nd stage bootloader indicator +// is on e.g RGB = Purple. If it is GPIO0, user should not hold this while +// reset since that will instead run the 1st stage ROM bootloader +#define PIN_BUTTON_UF2 0 + +// GPIO that implement 1-bit memory with RC components which hold the +// pin value long enough for double reset detection. +// #define PIN_DOUBLE_RESET_RC 10 + +//--------------------------------------------------------------------+ +// LED +//--------------------------------------------------------------------+ + +// GPIO connected to Neopixel data +#define NEOPIXEL_PIN 18 + +// #define NEOPIXEL_POWER_PIN 38 +// #define NEOPIXEL_POWER_STATE 1 + +// Brightness percentage from 1 to 255 +#define NEOPIXEL_BRIGHTNESS 0x10 + +// Number of neopixels +#define NEOPIXEL_NUMBER 1 + +//--------------------------------------------------------------------+ +// USB UF2 +//--------------------------------------------------------------------+ + +#define USB_VID 0x303A //espressif's +#define USB_PID 0x818A +#define USB_MANUFACTURER "CharaChorder" +#define USB_PRODUCT "CharaChorder Engine S2 - UF2 Bootloader" + +#define UF2_PRODUCT_NAME USB_MANUFACTURER " " USB_PRODUCT +#define UF2_BOARD_ID "CC-ENGINE-S2" +#define UF2_VOLUME_LABEL "CCBOOT" +#define UF2_INDEX_URL "https://www.charachorder.com" + +// Use favicon +// #define TINYUF2_FAVICON_HEADER "favicon_charachorder_256.h" + +#endif diff --git a/ports/espressif/boards/charachorder_engine_s2/sdkconfig b/ports/espressif/boards/charachorder_engine_s2/sdkconfig new file mode 100644 index 000000000..893539bc5 --- /dev/null +++ b/ports/espressif/boards/charachorder_engine_s2/sdkconfig @@ -0,0 +1,7 @@ +# Board Specific Config + +# Partition Table +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-2MB.csv" + +# Serial flasher config +CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y diff --git a/ports/espressif/boards/charachorder_lite_s2/board.cmake b/ports/espressif/boards/charachorder_lite_s2/board.cmake new file mode 100644 index 000000000..abbdf7abc --- /dev/null +++ b/ports/espressif/boards/charachorder_lite_s2/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32s2") diff --git a/ports/espressif/boards/charachorder_lite_s2/board.h b/ports/espressif/boards/charachorder_lite_s2/board.h new file mode 100644 index 000000000..c99a79055 --- /dev/null +++ b/ports/espressif/boards/charachorder_lite_s2/board.h @@ -0,0 +1,74 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef CHARACHORDER_LITE_S2_H_ +#define CHARACHORDER_LITE_S2_H_ + +//--------------------------------------------------------------------+ +// Button +//--------------------------------------------------------------------+ + +// Enter UF2 mode if GPIO is pressed while 2nd stage bootloader indicator +// is on e.g RGB = Purple. If it is GPIO0, user should not hold this while +// reset since that will instead run the 1st stage ROM bootloader +#define PIN_BUTTON_UF2 0 + +// GPIO that implement 1-bit memory with RC components which hold the +// pin value long enough for double reset detection. +// #define PIN_DOUBLE_RESET_RC 10 + +//--------------------------------------------------------------------+ +// LED +//--------------------------------------------------------------------+ + +// GPIO connected to Neopixel data +#define NEOPIXEL_PIN 18 + +// #define NEOPIXEL_POWER_PIN 38 +// #define NEOPIXEL_POWER_STATE 1 + +// Brightness percentage from 1 to 255 +#define NEOPIXEL_BRIGHTNESS 0x10 + +// Number of neopixels +#define NEOPIXEL_NUMBER 1 + +//--------------------------------------------------------------------+ +// USB UF2 +//--------------------------------------------------------------------+ + +#define USB_VID 0x303A //espressif's +#define USB_PID 0x812F +#define USB_MANUFACTURER "CharaChorder" +#define USB_PRODUCT "CharaChorder Lite-S2 UF2 Bootloader" + +#define UF2_PRODUCT_NAME USB_MANUFACTURER " " USB_PRODUCT +#define UF2_BOARD_ID "CC-Lite-S2" +#define UF2_VOLUME_LABEL "CCBOOT" +#define UF2_INDEX_URL "https://www.charachorder.com" + +// Use favicon +// #define TINYUF2_FAVICON_HEADER "favicon_charachorder_256.h" + +#endif diff --git a/ports/espressif/boards/charachorder_lite_s2/sdkconfig b/ports/espressif/boards/charachorder_lite_s2/sdkconfig new file mode 100644 index 000000000..893539bc5 --- /dev/null +++ b/ports/espressif/boards/charachorder_lite_s2/sdkconfig @@ -0,0 +1,7 @@ +# Board Specific Config + +# Partition Table +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-2MB.csv" + +# Serial flasher config +CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y diff --git a/ports/espressif/boards/charachorder_x_s2/board.cmake b/ports/espressif/boards/charachorder_x_s2/board.cmake new file mode 100644 index 000000000..abbdf7abc --- /dev/null +++ b/ports/espressif/boards/charachorder_x_s2/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32s2") diff --git a/ports/espressif/boards/charachorder_x_s2/board.h b/ports/espressif/boards/charachorder_x_s2/board.h new file mode 100644 index 000000000..5e6d08960 --- /dev/null +++ b/ports/espressif/boards/charachorder_x_s2/board.h @@ -0,0 +1,74 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef CHARACHORDER_X_S2_H_ +#define CHARACHORDER_X_S2_H_ + +//--------------------------------------------------------------------+ +// Button +//--------------------------------------------------------------------+ + +// Enter UF2 mode if GPIO is pressed while 2nd stage bootloader indicator +// is on e.g RGB = Purple. If it is GPIO0, user should not hold this while +// reset since that will instead run the 1st stage ROM bootloader +#define PIN_BUTTON_UF2 0 + +// GPIO that implement 1-bit memory with RC components which hold the +// pin value long enough for double reset detection. +// #define PIN_DOUBLE_RESET_RC 10 + +//--------------------------------------------------------------------+ +// LED +//--------------------------------------------------------------------+ + +// GPIO connected to Neopixel data +#define NEOPIXEL_PIN 18 + +// #define NEOPIXEL_POWER_PIN 38 +// #define NEOPIXEL_POWER_STATE 1 + +// Brightness percentage from 1 to 255 +#define NEOPIXEL_BRIGHTNESS 0x10 + +// Number of neopixels +#define NEOPIXEL_NUMBER 1 + +//--------------------------------------------------------------------+ +// USB UF2 +//--------------------------------------------------------------------+ + +#define USB_VID 0x303A //espressif's +#define USB_PID 0x818C +#define USB_MANUFACTURER "CharaChorder" +#define USB_PRODUCT "CharaChorder X S2 - UF2 Bootloader" + +#define UF2_PRODUCT_NAME USB_MANUFACTURER " " USB_PRODUCT +#define UF2_BOARD_ID "CC-X-S2" +#define UF2_VOLUME_LABEL "CCBOOT" +#define UF2_INDEX_URL "https://www.charachorder.com" + +// Use favicon +// #define TINYUF2_FAVICON_HEADER "favicon_charachorder_256.h" + +#endif diff --git a/ports/espressif/boards/charachorder_x_s2/sdkconfig b/ports/espressif/boards/charachorder_x_s2/sdkconfig new file mode 100644 index 000000000..893539bc5 --- /dev/null +++ b/ports/espressif/boards/charachorder_x_s2/sdkconfig @@ -0,0 +1,7 @@ +# Board Specific Config + +# Partition Table +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-2MB.csv" + +# Serial flasher config +CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y diff --git a/ports/espressif/partitions-2MB.csv b/ports/espressif/partitions-2MB.csv new file mode 100644 index 000000000..9ee9b1fa6 --- /dev/null +++ b/ports/espressif/partitions-2MB.csv @@ -0,0 +1,11 @@ +# ESP-IDF Partition Table +# Name, Type, SubType, Offset, Size, Flags +# bootloader.bin,, 0x1000, 32K +# partition table, 0x8000, 4K + +nvs, data, nvs, 0x9000, 20K, +otadata, data, ota, 0xe000, 8K, +ota_0, 0, ota_0, 0x10000, 768K, +ota_1, 0, ota_1, 0xd0000, 768K, +uf2, app, factory, 0x190000, 256K, +ffat, data, fat, 0x1d0000, 192K,