diff --git a/Robot_Adapter/CRUD/Read/Properties/FramingElementDesignProperties.cs b/Robot_Adapter/CRUD/Read/Properties/FramingElementDesignProperties.cs
index a94c5c26..a34ec1bc 100644
--- a/Robot_Adapter/CRUD/Read/Properties/FramingElementDesignProperties.cs
+++ b/Robot_Adapter/CRUD/Read/Properties/FramingElementDesignProperties.cs
@@ -59,93 +59,98 @@ private List<FramingElementDesignProperties> ReadFramingElementDesignProperties(
 
                 string steelMembersCodeType = m_RobotApplication.Project.Preferences.GetActiveCode(IRobotCodeType.I_CT_STEEL_STRUCTURES);
 
-                if (steelMembersCodeType == BHE.Query.GetStringFromEnum(DesignCode_Steel.BS_EN_1993_1_2005_NA_2008_A1_2014))
+                try
                 {
-                    IRDimMembParamsE32 memberDesignParams_EC3 = memberDef.CodeParams;
-                    bhomDesignProps.EulerBucklingLengthCoefficientY = memberDesignParams_EC3.BuckLengthCoeffY;
-                    bhomDesignProps.EulerBucklingLengthCoefficientZ = memberDesignParams_EC3.BuckLengthCoeffZ;
-                    //RobotEurocodeSteelDesignFactors mEuroCodeDesignFactors = rMemberType.Data;                    
-                    bool angle_conn = memberDesignParams_EC3.AngleConn;
-                    double beta = memberDesignParams_EC3.Beta;
-                    double boltsDiameter = memberDesignParams_EC3.BoltsDiam;
-                    int numberOfBolts = memberDesignParams_EC3.BoltsNo;
-                    bool isBracedInY = memberDesignParams_EC3.BracedY;
-                    bool isBracedInZ = memberDesignParams_EC3.BracedZ;
-                    IRDimBucklingCurveE32 bucklingCurveY = memberDesignParams_EC3.BucklingCurveY;
-                    IRDimBucklingCurveE32 bucklingCurveZ = memberDesignParams_EC3.BucklingCurveZ;
-                    IRDimBuckDiagramE32 bucklingDiagramY = memberDesignParams_EC3.BucklingDiagramY;
-                    IRDimBuckDiagramE32 bucklingDiagramZ = memberDesignParams_EC3.BucklingDiagramZ;
-                    IRDimComplexSectE32 complexSection = memberDesignParams_EC3.ComplexSect;
-                    double boltEdgeDistance_E2 = memberDesignParams_EC3.DistE2;
-                    double boltSpacing_P1 = memberDesignParams_EC3.DistP1;
-                    double shearParameter_ETA = memberDesignParams_EC3.Eta;
-                    IRDimFireResistE32 fireResistance = memberDesignParams_EC3.FireResist;
-                    bool isHotRolledPipe = memberDesignParams_EC3.HotRolledPipes;
-                    double kfi = memberDesignParams_EC3.Kfl;
-                    double lambda_LT0 = memberDesignParams_EC3.LamLT0;
-                    IRDimLatBuckMethodTypeE32 lateralBucklingMethodType = memberDesignParams_EC3.LatBuckMethodType;
-                    IRDimLatBuckCoeffDiagramE32 lateralBucklingCoefficientDiagram_LowerFlange = memberDesignParams_EC3.LatCoeffLowerFlange;
-                    IRDimLatBuckCoeffDiagramE32 lateralBucklingCoefficientDiagram_UpperFlange = memberDesignParams_EC3.LatCoeffUpperFlange;
-                    double lateralBucklingCoefficient_LowerFlange = memberDesignParams_EC3.LatCoeffLowerFlangeValue;
-                    double lateralBucklingCoefficient_UpperFlange = memberDesignParams_EC3.LatCoeffUpperFlangeValue;
-                    bool considerLeteralBuckling = memberDesignParams_EC3.LateralBuckling;
-                    IRDimLoadLevelE32 loadLevel = memberDesignParams_EC3.LoadLevel;
-                    double loadLevelValue = memberDesignParams_EC3.LoadLevelValue;
-                    IRDimLoadTypeE32 loadTypeY = memberDesignParams_EC3.LoadTypeY;
-                    IRDimLoadTypeE32 loadTypeZ = memberDesignParams_EC3.LoadTypeZ;
-                    double materialCoefficient_Gamma0 = memberDesignParams_EC3.MaterCoeffGamma0;
-                    double materialCoefficient_Gamma1 = memberDesignParams_EC3.MaterCoeffGamma1;
-                    double materialCoefficient_Gamma2 = memberDesignParams_EC3.MaterCoeffGamma2;
-                    double deflectionLimit_relativeY = memberDesignParams_EC3.RelLimitDeflUy;
-                    double deflectionLimit_relativeZ = memberDesignParams_EC3.RelLimitdeflUz;
-                    bool isSimplifiedParameters = memberDesignParams_EC3.Simplified;
-                    double tensileAreaNetGrossRatio = memberDesignParams_EC3.TensAreaNetGros;
-                    IRDimThinWalledE32 thinWalledProperties = memberDesignParams_EC3.ThinWalled;
-                    bool considerTorsionalBuckling = memberDesignParams_EC3.TorsBuckOn;
-                    bool tubeControl = memberDesignParams_EC3.TubeControl;
-                    IRDimYieldStrengthTypeE32 yieldStrengthType = memberDesignParams_EC3.YieldStrengthType;
-                    double yieldStrengthValue = memberDesignParams_EC3.YieldStrengthValue;
-                }
-
-                if (steelMembersCodeType == BHE.Query.GetStringFromEnum(DesignCode_Steel.BS5950))
-                {
-                    IRDimMembParamsBS59 memberDesignParams_BS5950 = memberDef.CodeParams;
-                    bhomDesignProps.EulerBucklingLengthCoefficientY = memberDesignParams_BS5950.BuckLengthCoeffY;
-                    bhomDesignProps.EulerBucklingLengthCoefficientZ = memberDesignParams_BS5950.BuckLengthCoeffZ;
-                }
-
 
-                if (steelMembersCodeType == BHE.Query.GetStringFromEnum(DesignCode_Steel.BS5950_2000))
-                {
-                    IRDimMembParamsBS59_2000 memberDesignParams_BS5950_2000 = memberDef.CodeParams;
-                    bhomDesignProps.EulerBucklingLengthCoefficientY = memberDesignParams_BS5950_2000.BuckLengthCoeffY;
-                    bhomDesignProps.EulerBucklingLengthCoefficientZ = memberDesignParams_BS5950_2000.BuckLengthCoeffZ;
+                    if (steelMembersCodeType == BHE.Query.GetStringFromEnum(DesignCode_Steel.BS_EN_1993_1_2005_NA_2008_A1_2014))
+                    {
+                        IRDimMembParamsE32 memberDesignParams_EC3 = memberDef.CodeParams;
+                        bhomDesignProps.EulerBucklingLengthCoefficientY = memberDesignParams_EC3.BuckLengthCoeffY;
+                        bhomDesignProps.EulerBucklingLengthCoefficientZ = memberDesignParams_EC3.BuckLengthCoeffZ;
+                        //RobotEurocodeSteelDesignFactors mEuroCodeDesignFactors = rMemberType.Data;                    
+                        bool angle_conn = memberDesignParams_EC3.AngleConn;
+                        double beta = memberDesignParams_EC3.Beta;
+                        double boltsDiameter = memberDesignParams_EC3.BoltsDiam;
+                        int numberOfBolts = memberDesignParams_EC3.BoltsNo;
+                        bool isBracedInY = memberDesignParams_EC3.BracedY;
+                        bool isBracedInZ = memberDesignParams_EC3.BracedZ;
+                        IRDimBucklingCurveE32 bucklingCurveY = memberDesignParams_EC3.BucklingCurveY;
+                        IRDimBucklingCurveE32 bucklingCurveZ = memberDesignParams_EC3.BucklingCurveZ;
+                        IRDimBuckDiagramE32 bucklingDiagramY = memberDesignParams_EC3.BucklingDiagramY;
+                        IRDimBuckDiagramE32 bucklingDiagramZ = memberDesignParams_EC3.BucklingDiagramZ;
+                        IRDimComplexSectE32 complexSection = memberDesignParams_EC3.ComplexSect;
+                        double boltEdgeDistance_E2 = memberDesignParams_EC3.DistE2;
+                        double boltSpacing_P1 = memberDesignParams_EC3.DistP1;
+                        double shearParameter_ETA = memberDesignParams_EC3.Eta;
+                        IRDimFireResistE32 fireResistance = memberDesignParams_EC3.FireResist;
+                        bool isHotRolledPipe = memberDesignParams_EC3.HotRolledPipes;
+                        double kfi = memberDesignParams_EC3.Kfl;
+                        double lambda_LT0 = memberDesignParams_EC3.LamLT0;
+                        IRDimLatBuckMethodTypeE32 lateralBucklingMethodType = memberDesignParams_EC3.LatBuckMethodType;
+                        IRDimLatBuckCoeffDiagramE32 lateralBucklingCoefficientDiagram_LowerFlange = memberDesignParams_EC3.LatCoeffLowerFlange;
+                        IRDimLatBuckCoeffDiagramE32 lateralBucklingCoefficientDiagram_UpperFlange = memberDesignParams_EC3.LatCoeffUpperFlange;
+                        double lateralBucklingCoefficient_LowerFlange = memberDesignParams_EC3.LatCoeffLowerFlangeValue;
+                        double lateralBucklingCoefficient_UpperFlange = memberDesignParams_EC3.LatCoeffUpperFlangeValue;
+                        bool considerLeteralBuckling = memberDesignParams_EC3.LateralBuckling;
+                        IRDimLoadLevelE32 loadLevel = memberDesignParams_EC3.LoadLevel;
+                        double loadLevelValue = memberDesignParams_EC3.LoadLevelValue;
+                        IRDimLoadTypeE32 loadTypeY = memberDesignParams_EC3.LoadTypeY;
+                        IRDimLoadTypeE32 loadTypeZ = memberDesignParams_EC3.LoadTypeZ;
+                        double materialCoefficient_Gamma0 = memberDesignParams_EC3.MaterCoeffGamma0;
+                        double materialCoefficient_Gamma1 = memberDesignParams_EC3.MaterCoeffGamma1;
+                        double materialCoefficient_Gamma2 = memberDesignParams_EC3.MaterCoeffGamma2;
+                        double deflectionLimit_relativeY = memberDesignParams_EC3.RelLimitDeflUy;
+                        double deflectionLimit_relativeZ = memberDesignParams_EC3.RelLimitdeflUz;
+                        bool isSimplifiedParameters = memberDesignParams_EC3.Simplified;
+                        double tensileAreaNetGrossRatio = memberDesignParams_EC3.TensAreaNetGros;
+                        IRDimThinWalledE32 thinWalledProperties = memberDesignParams_EC3.ThinWalled;
+                        bool considerTorsionalBuckling = memberDesignParams_EC3.TorsBuckOn;
+                        bool tubeControl = memberDesignParams_EC3.TubeControl;
+                        IRDimYieldStrengthTypeE32 yieldStrengthType = memberDesignParams_EC3.YieldStrengthType;
+                        double yieldStrengthValue = memberDesignParams_EC3.YieldStrengthValue;
+                    }
+
+
+                    if (steelMembersCodeType == BHE.Query.GetStringFromEnum(DesignCode_Steel.BS5950))
+                    {
+                        IRDimMembParamsBS59 memberDesignParams_BS5950 = memberDef.CodeParams;
+                        bhomDesignProps.EulerBucklingLengthCoefficientY = memberDesignParams_BS5950.BuckLengthCoeffY;
+                        bhomDesignProps.EulerBucklingLengthCoefficientZ = memberDesignParams_BS5950.BuckLengthCoeffZ;
+                    }
+
+
+                    if (steelMembersCodeType == BHE.Query.GetStringFromEnum(DesignCode_Steel.BS5950_2000))
+                    {
+                        IRDimMembParamsBS59_2000 memberDesignParams_BS5950_2000 = memberDef.CodeParams;
+                        bhomDesignProps.EulerBucklingLengthCoefficientY = memberDesignParams_BS5950_2000.BuckLengthCoeffY;
+                        bhomDesignProps.EulerBucklingLengthCoefficientZ = memberDesignParams_BS5950_2000.BuckLengthCoeffZ;
+                    }
+
+
+
+                    if (memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Y) < 0)
+                    {
+                        bhomDesignProps.MemberLengthY = -memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Y);
+                        bhomDesignProps.MemberLengthYIsRelative = true;
+                    }
+                    else
+                    {
+                        bhomDesignProps.MemberLengthY = memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Y);
+                        bhomDesignProps.MemberLengthYIsRelative = false;
+                    }
+
+                    if (memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Z) < 0)
+                    {
+                        bhomDesignProps.MemberLengthZ = -memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Z);
+                        bhomDesignProps.MemberLengthZIsRelative = true;
+                    }
+                    else
+                    {
+                        bhomDesignProps.MemberLengthZ = memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Z);
+                        bhomDesignProps.MemberLengthZIsRelative = false;
+                    }
                 }
-
-
-
-                if (memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Y) < 0)
-                {
-                    bhomDesignProps.MemberLengthY = -memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Y);
-                    bhomDesignProps.MemberLengthYIsRelative = true;
-                }
-                else
-                {
-                    bhomDesignProps.MemberLengthY = memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Y);
-                    bhomDesignProps.MemberLengthYIsRelative = false;
-                }
-
-                if (memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Z) < 0)
-                {
-                    bhomDesignProps.MemberLengthZ = -memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Z);
-                    bhomDesignProps.MemberLengthZIsRelative = true;
-                }
-                else
-                {
-                    bhomDesignProps.MemberLengthZ = memberDef.LengthYZUV(IRDimMembDefLengthDataType.I_DMDLDT_LENGTH_Z);
-                    bhomDesignProps.MemberLengthZIsRelative = false;
-                }
-
+                catch { Engine.Base.Compute.RecordWarning("Failed to extract FramingElementDesignProperties"); }
 
                 bhomDesignPropsList.Add(bhomDesignProps);
             }