parameters.proto

// Copyright 2010-2022 Google LLC
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// Contains the definitions for all the GLOP algorithm parameters and their
// default values.
//
// TODO(user): Make the above statement true by moving all algorithm parameters
// flags here.

syntax = "proto2";

package operations_research.glop;

option java_package = "com.google.ortools.glop";
option java_multiple_files = true;
option csharp_namespace = "Google.OrTools.Glop";
// next id = 70
message GlopParameters {
  // Supported algorithms for scaling:
  // EQUILIBRATION - progressive scaling by row and column norms until the
  // marginal difference passes below a threshold.
  // LINEAR_PROGRAM - EXPERIMENTAL: finding optimal scale factors using a linear
  // program in the log scale.
  enum ScalingAlgorithm {
    DEFAULT = 0;
    EQUILIBRATION = 1;
    LINEAR_PROGRAM = 2;
  }

  // Like a Boolean with an extra value to let the algorithm decide what is the
  // best choice.
  enum SolverBehavior {
    ALWAYS_DO = 0;
    NEVER_DO = 1;
    LET_SOLVER_DECIDE = 2;
  }

  // General strategy used during pricing.
  enum PricingRule {
    // Strategy using only the reduced cost of a variable.
    //
    // Note that compared to a textbook rule, we normalize the reduced cost of a
    // variable using the norm of the associated column. This improves quite a
    // bit the rule at almost no extra complexity. See the first paper from
    // Ping-Qi Pan cited in primal_edge_norms.h.
    DANTZIG = 0;

    // Normalize the reduced costs by the norm of the edges. Since computing
    // norms at each step is too expensive, reduced costs and norms are
    // updated iteratively from one iteration to the next.
    STEEPEST_EDGE = 1;

    // Normalize the reduced costs by an approximation of the norm of the edges.
    // This should offer a good tradeoff between steepest edge and speed.
    DEVEX = 2;
  }

  // Heuristics to use in the primal simplex to remove fixed slack variables
  // from the initial basis.
  enum InitialBasisHeuristic {
    // Leave the fixed slack variables in the basis.
    NONE = 0;

    // Use the heuristic described in:
    // Robert E. Bixby, "Implementing the Simplex Method: The Initial Basis"
    // ORSA Jounal on Computing, Vol. 4, No. 3, Summer 1992.
    // http://joc.journal.informs.org/content/4/3/267.abstract
    //
    // It requires use_scaling to be true, otherwise it behaves like NONE.
    BIXBY = 1;

    // Replace the fixed columns while keeping the initial basis triangular. The
    // heuristic to select which column to use first is similar to the one used
    // for BIXBY. This algorithm is similar to the "advanced initial basis"
    // GLPK uses by default. Both algorithm produce a triangular initial basis,
    // however the heuristics used are not exactly the same.
    TRIANGULAR = 2;

    // Use a version of Maros's triangular feasibility crash
    // https://books.google.fr/books?isbn=1461502578
    // Chapter 9.8.2.1
    MAROS = 3;
  }

  optional ScalingAlgorithm scaling_method = 57 [default = EQUILIBRATION];

  // PricingRule to use during the feasibility phase.
  optional PricingRule feasibility_rule = 1 [default = STEEPEST_EDGE];

  // PricingRule to use during the optimization phase.
  optional PricingRule optimization_rule = 2 [default = STEEPEST_EDGE];

  // We estimate the factorization accuracy of B during each pivot by using
  // the fact that we can compute the pivot coefficient in two ways:
  // - From direction[leaving_row].
  // - From update_row[entering_column].
  // If the two values have a relative difference above this threshold, we
  // trigger a refactorization.
  optional double refactorization_threshold = 6 [default = 1e-9];

  // We estimate the accuracy of the iteratively computed reduced costs. If
  // it falls below this threshold, we reinitialize them from scratch. Note
  // that such an operation is pretty fast, so we can use a low threshold.
  // It is important to have a good accuracy here (better than the
  // dual_feasibility_tolerance below) to be sure of the sign of such a cost.
  optional double recompute_reduced_costs_threshold = 8 [default = 1e-8];

  // Note that the threshold is a relative error on the actual norm (not the
  // squared one) and that edge norms are always greater than 1. Recomputing
  // norms is a really expensive operation and a large threshold is ok since
  // this doesn't impact directly the solution but just the entering variable
  // choice.
  optional double recompute_edges_norm_threshold = 9 [default = 100.0];

  // The three following parameters correspond to the tolerance epsilon 1,2 and
  // 3 described in Chvatal p. 115 in the section "Zero Tolerances".

  // This tolerance indicates by how much we allow the variable values to go out
  // of bounds and still consider the current solution primal-feasible. We also
  // use the same tolerance for the error A.x - b. Note that the two errors are
  // closely related if A is scaled in such a way that the greatest coefficient
  // magnitude on each column is 1.0.
  //
  // This is also simply called feasibility tolerance in other solvers.
  optional double primal_feasibility_tolerance = 10 [default = 1e-8];

  // Variables whose reduced costs have an absolute value smaller than this
  // tolerance are not considered as entering candidates. That is they do not
  // take part in deciding whether a solution is dual-feasible or not.
  //
  // Note that this value can temporarily increase during the execution of the
  // algorithm if the estimated precision of the reduced costs is higher than
  // this tolerance. Note also that we scale the costs (in the presolve step) so
  // that the cost magnitude range contains one.
  //
  // This is also known as the optimality tolerance in other solvers.
  optional double dual_feasibility_tolerance = 11 [default = 1e-8];

  // During the primal simplex (resp. dual simplex), the coefficients of the
  // direction (resp. update row) with a magnitude lower than this threshold are
  // not considered during the ratio test. This tolerance is related to the
  // precision at which a Solve() involving the basis matrix can be performed.
  //
  // TODO(user): Automatically increase it when we detect that the precision
  // of the Solve() is worse than this.
  optional double ratio_test_zero_threshold = 12 [default = 1e-9];

  // This impacts the ratio test and indicates by how much we allow a basic
  // variable value that we move to go out of bounds. The value should be in
  // [0.0, 1.0) and should be interpreted as a ratio of the
  // primal_feasibility_tolerance. Setting this to 0.0 basically disables the
  // Harris ratio test while setting this too close to 1.0 will make it
  // difficult to keep the variable values inside their bounds modulo the
  // primal_feasibility_tolerance.
  //
  // Note that the same comment applies to the dual simplex ratio test. There,
  // we allow the reduced costs to be of an infeasible sign by as much as this
  // ratio times the dual_feasibility_tolerance.
  optional double harris_tolerance_ratio = 13 [default = 0.5];

  // When we choose the leaving variable, we want to avoid small pivot because
  // they are the less precise and may cause numerical instabilities. For a
  // pivot under this threshold times the infinity norm of the direction, we try
  // various countermeasures in order to avoid using it.
  optional double small_pivot_threshold = 14 [default = 1e-6];

  // We never follow a basis change with a pivot under this threshold.
  optional double minimum_acceptable_pivot = 15 [default = 1e-6];

  // In order to increase the sparsity of the manipulated vectors, floating
  // point values with a magnitude smaller than this parameter are set to zero
  // (only in some places). This parameter should be positive or zero.
  optional double drop_tolerance = 52 [default = 1e-14];

  // Whether or not we scale the matrix A so that the maximum coefficient on
  // each line and each column is 1.0.
  optional bool use_scaling = 16 [default = true];

  // This is only used if use_scaling is true. After the scaling is done, we
  // also scale the objective by a constant factor. This is important because
  // scaling the cost has a direct influence on the meaning of the
  // dual_feasibility_tolerance. Because we usually use a fixed tolerance, the
  // objective must be well scaled to make sense.
  enum CostScalingAlgorithm {
    // Leave the cost as is.
    NO_COST_SCALING = 0;

    // This is the most defensive option. It makes sure that
    // [min_cost_magnitude, max_cost_magnitude] contains 1.0, and if not, it
    // makes the closest magnitude bound equal to one.
    CONTAIN_ONE_COST_SCALING = 1;

    // Make the mean of the non-zero costs equals to one.
    MEAN_COST_SCALING = 2;

    // Make the median of the non-zero costs equals to one.
    MEDIAN_COST_SCALING = 3;
  }
  optional CostScalingAlgorithm cost_scaling = 60
      [default = CONTAIN_ONE_COST_SCALING];

  // What heuristic is used to try to replace the fixed slack columns in the
  // initial basis of the primal simplex.
  optional InitialBasisHeuristic initial_basis = 17 [default = TRIANGULAR];

  // Whether or not we keep a transposed version of the matrix A to speed-up the
  // pricing at the cost of extra memory and the initial tranposition
  // computation.
  optional bool use_transposed_matrix = 18 [default = true];

  // Number of iterations between two basis refactorizations. Note that various
  // conditions in the algorithm may trigger a refactorization before this
  // period is reached. Set this to 0 if you want to refactorize at each step.
  optional int32 basis_refactorization_period = 19 [default = 64];

  // If this is true, then basis_refactorization_period becomes a lower bound on
  // the number of iterations between two refactorization (provided there is no
  // numerical accuracy issues). Depending on the estimated time to refactorize
  // vs the extra time spend in each solves because of the LU update, we try to
  // balance the two times.
  optional bool dynamically_adjust_refactorization_period = 63 [default = true];

  // Whether or not we solve the dual of the given problem.
  // With a value of auto, the algorithm decide which approach is probably the
  // fastest depending on the problem dimensions (see dualizer_threshold).
  optional SolverBehavior solve_dual_problem = 20 [default = LET_SOLVER_DECIDE];

  // When solve_dual_problem is LET_SOLVER_DECIDE, take the dual if the number
  // of constraints of the problem is more than this threshold times the number
  // of variables.
  optional double dualizer_threshold = 21 [default = 1.5];

  // When the problem status is OPTIMAL, we check the optimality using this
  // relative tolerance and change the status to IMPRECISE if an issue is
  // detected.
  //
  // The tolerance is "relative" in the sense that our thresholds are:
  // - tolerance * max(1.0, abs(bound)) for crossing a given bound.
  // - tolerance * max(1.0, abs(cost)) for an infeasible reduced cost.
  // - tolerance for an infeasible dual value.
  optional double solution_feasibility_tolerance = 22 [default = 1e-6];

  // If true, then when the solver returns a solution with an OPTIMAL status,
  // we can guarantee that:
  // - The primal variable are in their bounds.
  // - The dual variable are in their bounds.
  // - If we modify each component of the right-hand side a bit and each
  //   component of the objective function a bit, then the pair (primal values,
  //   dual values) is an EXACT optimal solution of the perturbed problem.
  // - The modifications above are smaller than the associated tolerances as
  //   defined in the comment for solution_feasibility_tolerance (*).
  //
  // (*): This is the only place where the guarantee is not tight since we
  // compute the upper bounds with scalar product of the primal/dual
  // solution and the initial problem coefficients with only double precision.
  //
  // Note that whether or not this option is true, we still check the
  // primal/dual infeasibility and objective gap. However if it is false, we
  // don't move the primal/dual values within their bounds and leave them
  // untouched.
  optional bool provide_strong_optimal_guarantee = 24 [default = true];

  // If true, the internal API will change the return status to imprecise if the
  // solution does not respect the internal tolerances.
  optional bool change_status_to_imprecise = 58 [default = true];

  // When the solution of phase II is imprecise, we re-run the phase II with the
  // opposite algorithm from that imprecise solution (i.e., if primal or dual
  // simplex was used, we use dual or primal simplex, respectively). We repeat
  // such re-optimization until the solution is precise, or we hit this limit.
  optional double max_number_of_reoptimizations = 56 [default = 40];

  // Threshold for LU-factorization: for stability reasons, the magnitude of the
  // chosen pivot at a given step is guaranteed to be greater than this
  // threshold times the maximum magnitude of all the possible pivot choices in
  // the same column. The value must be in [0,1].
  optional double lu_factorization_pivot_threshold = 25 [default = 0.01];

  // Maximum time allowed in seconds to solve a problem.
  optional double max_time_in_seconds = 26 [default = inf];

  // Maximum deterministic time allowed to solve a problem. The deterministic
  // time is more or less correlated to the running time, and its unit should
  // be around the second (at least on a Xeon(R) CPU E5-1650 v2 @ 3.50GHz).
  //
  // TODO(user): Improve the correlation.
  optional double max_deterministic_time = 45 [default = inf];

  // Maximum number of simplex iterations to solve a problem.
  // A value of -1 means no limit.
  optional int64 max_number_of_iterations = 27 [default = -1];

  // How many columns do we look at in the Markowitz pivoting rule to find
  // a good pivot. See markowitz.h.
  optional int32 markowitz_zlatev_parameter = 29 [default = 3];

  // If a pivot magnitude is smaller than this during the Markowitz LU
  // factorization, then the matrix is assumed to be singular. Note that
  // this is an absolute threshold and is not relative to the other possible
  // pivots on the same column (see lu_factorization_pivot_threshold).
  optional double markowitz_singularity_threshold = 30 [default = 1e-15];

  // Whether or not we use the dual simplex algorithm instead of the primal.
  optional bool use_dual_simplex = 31 [default = false];

  // During incremental solve, let the solver decide if it use the primal or
  // dual simplex algorithm depending on the current solution and on the new
  // problem. Note that even if this is true, the value of use_dual_simplex
  // still indicates the default algorithm that the solver will use.
  optional bool allow_simplex_algorithm_change = 32 [default = false];

  // Devex weights will be reset to 1.0 after that number of updates.
  optional int32 devex_weights_reset_period = 33 [default = 150];

  // Whether or not we use advanced preprocessing techniques.
  optional bool use_preprocessing = 34 [default = true];

  // Whether or not to use the middle product form update rather than the
  // standard eta LU update. The middle form product update should be a lot more
  // efficient (close to the Forrest-Tomlin update, a bit slower but easier to
  // implement). See for more details:
  // Qi Huangfu, J. A. Julian Hall, "Novel update techniques for the revised
  // simplex method", 28 january 2013, Technical Report ERGO-13-0001
  // http://www.maths.ed.ac.uk/hall/HuHa12/ERGO-13-001.pdf
  optional bool use_middle_product_form_update = 35 [default = true];

  // Whether we initialize devex weights to 1.0 or to the norms of the matrix
  // columns.
  optional bool initialize_devex_with_column_norms = 36 [default = true];

  // Whether or not we exploit the singleton columns already present in the
  // problem when we create the initial basis.
  optional bool exploit_singleton_column_in_initial_basis = 37 [default = true];

  // Like small_pivot_threshold but for the dual simplex. This is needed because
  // the dual algorithm does not interpret this value in the same way.
  // TODO(user): Clean this up and use the same small pivot detection.
  optional double dual_small_pivot_threshold = 38 [default = 1e-4];

  // A floating point tolerance used by the preprocessors. This is used for
  // things like detecting if two columns/rows are proportional or if an
  // interval is empty.
  //
  // Note that the preprocessors also use solution_feasibility_tolerance() to
  // detect if a problem is infeasible.
  optional double preprocessor_zero_tolerance = 39 [default = 1e-9];

  // The solver will stop as soon as it has proven that the objective is smaller
  // than objective_lower_limit or greater than objective_upper_limit. Depending
  // on the simplex algorithm (primal or dual) and the optimization direction,
  // note that only one bound will be used at the time.
  //
  // Important: The solver does not add any tolerances to these values, and as
  // soon as the objective (as computed by the solver, so with some imprecision)
  // crosses one of these bounds (strictly), the search will stop. It is up to
  // the client to add any tolerance if needed.
  optional double objective_lower_limit = 40 [default = -inf];
  optional double objective_upper_limit = 41 [default = inf];

  // During a degenerate iteration, the more conservative approach is to do a
  // step of length zero (while shifting the bound of the leaving variable).
  // That is, the variable values are unchanged for the primal simplex or the
  // reduced cost are unchanged for the dual simplex. However, instead of doing
  // a step of length zero, it seems to be better on degenerate problems to do a
  // small positive step. This is what is recommended in the EXPAND procedure
  // described in:
  // P. E. Gill, W. Murray, M. A. Saunders, and M. H. Wright. "A practical anti-
  // cycling procedure for linearly constrained optimization".
  // Mathematical Programming, 45:437\u2013474, 1989.
  //
  // Here, during a degenerate iteration we do a small positive step of this
  // factor times the primal (resp. dual) tolerance. In the primal simplex, this
  // may effectively push variable values (very slightly) further out of their
  // bounds (resp. reduced costs for the dual simplex).
  //
  // Setting this to zero reverts to the more conservative approach of a zero
  // step during degenerate iterations.
  optional double degenerate_ministep_factor = 42 [default = 0.01];

  // At the beginning of each solve, the random number generator used in some
  // part of the solver is reinitialized to this seed. If you change the random
  // seed, the solver may make different choices during the solving process.
  // Note that this may lead to a different solution, for example a different
  // optimal basis.
  //
  // For some problems, the running time may vary a lot depending on small
  // change in the solving algorithm. Running the solver with different seeds
  // enables to have more robust benchmarks when evaluating new features.
  //
  // Also note that the solver is fully deterministic: two runs of the same
  // binary, on the same machine, on the exact same data and with the same
  // parameters will go through the exact same iterations. If they hit a time
  // limit, they might of course yield different results because one will have
  // advanced farther than the other.
  optional int32 random_seed = 43 [default = 1];

  // Number of threads in the OMP parallel sections. If left to 1, the code will
  // not create any OMP threads and will remain single-threaded.
  optional int32 num_omp_threads = 44 [default = 1];

  // When this is true, then the costs are randomly perturbed before the dual
  // simplex is even started. This has been shown to improve the dual simplex
  // performance. For a good reference, see Huangfu Q (2013) "High performance
  // simplex solver", Ph.D, dissertation, University of Edinburgh.
  optional bool perturb_costs_in_dual_simplex = 53 [default = false];

  // We have two possible dual phase I algorithms. Both work on an LP that
  // minimize the sum of dual infeasiblities. One use dedicated code (when this
  // param is true), the other one use exactly the same code as the dual phase
  // II but on an auxiliary problem where the variable bounds of the original
  // problem are changed.
  //
  // TODO(user): For now we have both, but ideally the non-dedicated version
  // will win since it is a lot less code to maintain.
  optional bool use_dedicated_dual_feasibility_algorithm = 62 [default = true];

  // The magnitude of the cost perturbation is given by
  // RandomIn(1.0, 2.0) * (
  //     relative_cost_perturbation * cost
  //   + relative_max_cost_perturbation * max_cost);
  optional double relative_cost_perturbation = 54 [default = 1e-5];
  optional double relative_max_cost_perturbation = 55 [default = 1e-7];

  // If our upper bound on the condition number of the initial basis (from our
  // heurisitic or a warm start) is above this threshold, we revert to an all
  // slack basis.
  optional double initial_condition_number_threshold = 59 [default = 1e50];

  // If true, logs the progress of a solve to LOG(INFO). Note that the same
  // messages can also be turned on by displaying logs at level 1 for the
  // relevant files.
  optional bool log_search_progress = 61 [default = false];

  // If true, logs will be displayed to stdout instead of using Google log info.
  optional bool log_to_stdout = 66 [default = true];

  // If the starting basis contains FREE variable with bounds, we will move
  // any such variable to their closer bounds if the distance is smaller than
  // this parameter.
  //
  // The starting statuses can contains FREE variables with bounds, if a user
  // set it like this externally. Also, any variable with an initial BASIC
  // status that was not kept in the initial basis is marked as FREE before this
  // step is applied.
  //
  // Note that by default a FREE variable is assumed to be zero unless a
  // starting value was specified via SetStartingVariableValuesForNextSolve().
  //
  // Note that, at the end of the solve, some of these FREE variable with bounds
  // and an interior point value might still be left in the final solution.
  // Enable push_to_vertex to clean these up.
  optional double crossover_bound_snapping_distance = 64 [default = inf];

  // If the optimization phases finishes with super-basic variables (i.e.,
  // variables that either 1) have bounds but are FREE in the basis, or 2) have
  // no bounds and are FREE in the basis at a nonzero value), then run a "push"
  // phase to push these variables to bounds, obtaining a vertex solution. Note
  // this situation can happen only if a starting value was specified via
  // SetStartingVariableValuesForNextSolve().
  optional bool push_to_vertex = 65 [default = true];

  // If presolve runs, include the pass that detects implied free variables.
  optional bool use_implied_free_preprocessor = 67 [default = true];

  // Any finite values in the input LP must be below this threshold, otherwise
  // the model will be reported invalid. This is needed to avoid floating point
  // overflow when evaluating bounds * coeff for instance. In practice, users
  // shouldn't use super large values in an LP. With the default threshold, even
  // evaluating large constraint with variables at their bound shouldn't cause
  // any overflow.
  optional double max_valid_magnitude = 199 [default = 1e30];

  // On some problem like stp3d or pds-100 this makes a huge difference in
  // speed and number of iterations of the dual simplex.
  optional bool dual_price_prioritize_norm = 69 [default = false];
}